[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 30, Issue 2 (Summer 2012) ::
J Dent Sch GYEAR__, 30(2): 86-94 Back to browse issues page
Effect of Zirconia Substructure Design on the In-Vitro Fracture Load of Molar Zirconia Core Crowns
Kaveh Seyedan Dr., Amir Fayaz Dr., Amin Faraqat Dr., Sare Habibzade Corresponding Author: Dr. * , Hasan Sazgar Dr.
Assistant Professor Dept. of Prosthodontics
Abstract:   (4742 Views)

Objective: In the available all-ceramic systems the zirconia core is commonly fabricated as one layer with an even thickness, but the veneering porcelain has different thicknesses in different parts of the restoration and therefore, undergoes chipping and fracture more rapidly under masticatory forces. This study aimed at comparing the fracture load of all-ceramic crowns with 2 different zirconia core designs in Cercon system and in-vitro conditions.

Methods: In the present experimental study, 10 metal dies of mandibular first molar were fabricated with NNB base metal alloy using lost wax technique. Ten standard zirconia cores were then fabricated with an even thickness of 0.5 mm using Cercon CAD/CAM System. Also, 10 more were fabricated in the customized form with a 1 mm labial collar and 2 mm lingual shoulder. Porcelain was applied on all samples by an expert technician using an index. The prepared crowns were placed on their respective dies and cemented with Panavia F resin cement and under the constant pressure of 25 N. Vertical compressive force was applied to the samples by means of a stainless steel ball at a crosshead speed of 0.5 mm/min using Universal Testing Machine until failure. Data were analyzed using student t test.

Results: Our study results demonstrated the fracture load of 1852.11±587.9 N for zirconia core crowns with standard core design and 3332.63±916.38 N for custom design crowns. Statistical analyses demonstrated that the fracture load was significantly higher for customized core designs than the standard design cores(P<0.0001).

Conclusion: Considering the obtained results we can conclude that crowns with customized core design have a greater fracture resistance than those with standard design.

Keywords: Fracture, Zirconia core, All-ceramic crowns.
Full-Text [PDF 628 kb]   (2025 Downloads)    
Type of Study: Original Article | Subject: Special
Received: 2012/07/28
Add your comments about this article
Your username or Email:

Write the security code in the box >

XML     Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Seyedan K, Fayaz A, Faraqat A, Habibzade S, Sazgar H. Effect of Zirconia Substructure Design on the In-Vitro Fracture Load of Molar Zirconia Core Crowns. J Dent Sch. 2012; 30 (2) :86-94
URL: http://jds.sbmu.ac.ir/article-1-997-en.html

Volume 30, Issue 2 (Summer 2012) Back to browse issues page
مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی شهید بهشتی Shahid Beheshti University Dental Journal
Persian site map - English site map - Created in 0.07 seconds with 31 queries by YEKTAWEB 3701