[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 27, Issue 1 (Spring 2009) ::
J Dent Sch GYEAR__, 27(1): 13-17 Back to browse issues page
The effects of abutment screw access channel filling material on resistance to dislodgement of cement retained implant-supported crowns
Ali Hafezeqoran Corresponding Author: Dr. *1, Roodabe Koodarian Dr., Kaveh Seyedan Dr.
1- , hafezeqoran@tbzmed.ac.ir
Abstract:   (8250 Views)

Background and Aim: Little is known concerning factors influencing the retention of fixed prostheses cemented to implant abutments. The purpose of this study was to investigate the effect of varying screw access channel filling methods on the retention of implant-supported prosthesis.

Materials & Methods: To perform this experimental study, forty titanium implant abutments (Biohorizons) were placed in implant analogues. Implant analogues were mounted in acrylic resin blocks using surveyor. After fabrication of crowns for each abutment, 3.5 mm of the flat axial wall of all abutments was removed. Specimens were divided into 4 groups. In three groups, the screw access channels were fully filled with Wax, Polyvinyl Siloxane and Cotosol. In the fourth group, access hole partially filled with wax. Provisional luting agents Temp-Bond, Dycal and Temp-Bond NE were used to secure the crowns to the respective abutments. All specimens were stored in 100% humidity environment prior to testing. Each crown was pulled using a universal testing machine and tensile strength was recorded (N). Data were analyzed using ANOVA. Results: When Dycal was used for cementation, higher tensile strength was observed by partially filled access hole with Wax, fully filled with Wax, Cotosol and Polyvinyl Siloxane respectively. Temp-Bond NE showed significantly higher tensile strength when Polyvinyl Siloxane was used as screw access channel filling material. However, no difference was found in tensile strength of Temp-Bond with different materials used for filling of access hole.

Conclusion: The retention of castings cemented to implant abutments with Temp-Bond NE or Dycal is influenced by the filling modality of screw access channel.

Keywords: Dental implant, Retention, Luting agents
Full-Text [PDF 150 kb]   (1211 Downloads)    
Type of Study: Original Article | Subject: Special
Received: 2006/09/6
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA


XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hafezeqoran A, Koodarian R, Seyedan K. The effects of abutment screw access channel filling material on resistance to dislodgement of cement retained implant-supported crowns. J Dent Sch. 2009; 27 (1) :13-17
URL: http://jds.sbmu.ac.ir/article-1-482-en.html


Volume 27, Issue 1 (Spring 2009) Back to browse issues page
مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی شهید بهشتی Shahid Beheshti University Dental Journal
Persian site map - English site map - Created in 0.05 seconds with 32 queries by YEKTAWEB 3977