[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 26, Issue 1 (Spring 2008) ::
J Dent Sch GYEAR__, 26(1): 32-39 Back to browse issues page
Effect of thermocycling on the shear bond strength of composite-resin to Supercast alloy
Maryam Khoroushi Corresponding Author: Dr. *1, Mona Bazzazzadeh Dr.
1- , khoroushi@dnt.mui.ac.ir
Abstract:   (6092 Views)

Background and Aim: Intraoral repairs often involve bonding composite to fractured PFM crowns. Newer adhesive systems currently referred to as multipurpose systems are capable of bonding to enamel, dentin, metal and porcelain. The Adper Scotchbond Multipurpose Plus system (ASMP) is as one of the systems using in repair procedures. Most studies observed significant differences between early and late bond-strength results. This study evaluated the effect of thermal stresses on shear bond strength of composite resin to Supercast alloy by using different surface treatments including etching, sandblasting and combination.

Methods & Materials: In this invitro experimental study composite cylinders were bonded with ASMP to the 60 surfaces of alloy that were treated with etching (groups 184) , sandblasting (groups 285) or combination of both (groups 386) following the manufacturer instructions. In each group, groups 4, 5 and 6 were thermocycled intermittently in 5 & 55 Cº. Groups 1, 2 & 3 were stored in 37 Cº distilled water. Shear bond strengths were measured and compared by loading each specimen in shear to failure in an Instron testing machine. Data were analyzed using two-way ANOVA and Duncan tests.

Results: The mean shear bond strengths in groups 1 to 6 were respectively: 1.84±0.49, 4.77±0.77, 17.97±3.59, 1.08±0.62, 1.98±0.81, 12.77±2.38 (MPa). There were significant differences between the study groups (p<0.001).

Conclusion: Thermocycling significantly reduced the bond strength of composite resin and Supercast alloy. The bond strength of composite resin increased when the combination of sandblasting and etching used for surface treatment.

J Dent Sch 2008 26(1): 6

Keywords: Shear strength, Composite resin, Metal-ceramic alloy
Full-Text [PDF 171 kb]   (1277 Downloads)    
Type of Study: Original Article | Subject: General
Received: 2006/09/6
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA


XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Khoroushi M, Bazzazzadeh M. Effect of thermocycling on the shear bond strength of composite-resin to Supercast alloy. J Dent Sch. 2008; 26 (1) :32-39
URL: http://jds.sbmu.ac.ir/article-1-288-en.html


Volume 26, Issue 1 (Spring 2008) Back to browse issues page
مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی شهید بهشتی Shahid Beheshti University Dental Journal
Persian site map - English site map - Created in 0.06 seconds with 32 queries by YEKTAWEB 3991